The broker pens are done! The holly one will probably not be part of the set, but I have ten others that are completed. I learned a lot during the process. In particular, the sanding technique that I learned from the web site I mentioned in an earlier post has worked out REALLY well. I have also learned, through trial and error, how to better use the skew chisel so that I do not get tearout. For posterity, the full cast of characters:
Final tally: 3 cocobolo (1 very striking, 2 pretty cool), 2 Lignum Vitae (1 with the new sanding technique), and one each of: Bloodwood, Osage Orange (mistakenly called Orangeheart in an earlier post), Bubinga, Pink Ivory, and Bocote.
This morning there was an 'event' at Woodcraft, and there was 10% off of everything in the store (20% off of wood!). So, we went down there (we had also gotten a coupon for a free bag of odds and ends from the store) and, well, spent money again. Most of the money was spent on wood (a BEAUTIFUL piece of Cocobolo, two nice pieces of Bloodwood, and a large piece of Honey Mesquite - something that looks like Mahogany and has a cool grain to it.). Some of the money was spent on a chuck for the lathe. It turns out that the wine stopper starter kit does not include a chuck and a Morse Taper (I'll explain what that is as soon as I have used it successfully), but both are needed for working on the wine stoppers (and can be used for other projects like pepper mills and such).
All told, I spent $92.50 on materials which would normally cost $111.63:
Totals:
Out of pocket $242.47, Total: $341.56
All is not lost, though, as I really think that my pen-making skills are improving. I finally made the Olivewood Slimline pen that I cut and drilled ages ago, and it came out pretty well:
I also finally turned the wood from the Purpleheart Click pen that I cut and drilled a while back. Like other efforts with purpleheart, however, the wood is kind of gray-brown after being turned. This time, instead of going forward with the pen, I am going to let the turned pieces sit for a while and see if oxidation helps to restore the purple colour. If not, I am going to return all of my purpleheart blanks, including a large piece that I was hoping to use for a lamp at some point. It just does not seem worth the effort to turn purpleheart, unless I figure something out that is currently eluding me.
After coming back from Woodcraft and turning the Olivewood pen, I cut and drilled four blanks for click pens from the cocobolo that I bought this morning. I have quite a bit of cocobolo already, but this piece is especially cool, both in its reddish colour and its grain. Two people came up to me in the store and said that they had each seen someone different almost buy the piece that I was buying, and one person said that they were thinking of buying it themselves. When you see a piece like this, you just have to get it.
One of the blanks did not make it past the drilling stage, but I drilled and glued the other three, and this afternoon I turned and sanded and polished it, and I think it is one of my best ever:
I could not decide which picture did it justice (neither one does, really), so I included both. It took a lot of effort to line up the grain, since the bottom of the click pen screws into the top half. With a Classic American pen, you can just line up the grain and push the two halves together, but with a click pen you have to screw it in just right if you are making a pen where there is visible grain. A cool part of this too was that the black parts of the pen were not visible until I had turned it. The outside of the wood looked completely different!
As a last picture, here are two Cocobolo bullet-tip pens. One of them I have had for a while, but the other one I finally finished gluing together recently:
The red hue of the Cocobolo is set off nicely by the silver of the bullet-tip kit.
No comments:
Post a Comment