Sharp tools make all the difference

Tonight, before turning the cocobolo ballpoint twist pen (which came out very well), I sharpened the roughing gouge on the wheel and then sharpened my skew chisel on the diamond stone for the first time. What a difference! Using the skew chisel on the cocobolo was amazing. It cut so easily and so smoothly...I think it is more than ever my favourite tool.

Here is the pen I made tonight:



Another first-time experience: I had heard that when you drill out a pen blank, you should put a block of wood under the blank so that the blank does not split as the drill bit comes out the bottom. I had never run into this issue, so I did not think much of it...until tonight. I was drilling out the bloodwood blank that I had cut earlier in the evening, and the blank split because I drilled it too fast and there was no piece of wood under the blank.

Of course, now that I have a band saw, it was a matter of about 5 minutes before I had another bloodwood blank to drill. This one I drilled much more slowly, and it worked a lot better. I still (full disclosure) did not put a piece of wood under the blank, but I think that the slow drilling helped a lot. If there is a need to drill quickly, I should put the block of wood under the blank, I guess.

I decided to try the bullet tip pen again. I have tried two of them, and they both came out well in their own way. Hopefully the third one will come out VERY well. I will be using cocobolo for it.